Konica Minolta bizhub C10X - Manual (Page 149)

Replacing the Toner Cartridge 135
15
Carefully close the scanner unit.
"
When the scanner unit is
closed, the black toner
cartridge automatically
moves so that it can be
replaced. With each
press of the TC Change
key, the yellow, then
magenta toner cartridge
moves so that it can be
replaced.
16
Press the Stop/Reset key.
The message is erased from the message window, and machine is reset
so that it can continue printing.
"
If no operation is performed for more than 30 seconds after the
scanner unit is closed, the machine is automatically reset so that it
can print.
"
The machine must complete a calibration cycle (less than 2 min-
utes) after a toner cartridge has been replaced. If you open a cover
before the machine is reset, the calibration stops, then starts over
again after the cover is closed.