Konica Minolta bizhub C10X - Manual (Page 193)

Solving Other Problems 179
Images can-
not be
printed from
the digital
camera. The digital camera
transfer mode is not
set to PictBridge. Set the digital camera transfer mode to
PictBridge.
"
The machine supports only
PictBridge-enabled digital
camera.
If the print settings
specified for the digi-
tal camera differ from
the print settings
specified for the
printer, images may
not be printed. Change the print settings for the digital
camera in “Printer Setup”, and then try
printing again.
The paper size speci-
fied with the digital
camera differs from
the paper size speci-
fied with this
machine.
The message
“Please confirm the
printer.” appears on
the digital camera,
and no error mes-
sage appears on this
machine. Specify the same paper size with the
digital camera and with this machine.
A paper size other
than
A4 or LETTER
was selected on this
machine for layout
printing.
No error message
appears on this
machine.
Set the paper size on this machine to
A4 or LETTER .
Symptom Cause Solution