Konica Minolta bizhub C10X - Manual (Page 135)

Registering Recipients 121
9
To program other group dialing, press the one-touch dial key, and then
repeat the procedure starting from step 5.
OR
To finish the procedure and return to the Scan mode screen, continue
pressing the Cancel/C key until the Scan mode screen is displayed.
Changing/Deleting Group Dialing Information
The registered group dialing information can be corrected.
1
Press the Menu Select key, then the , key three times.
2
Check that the FAX REGISTRATION screen appears, then press the
Menu Select key, and then press the , key twice.
3
Check that the GROUP DIAL screen appears, and then press the Menu
Select key.
4
Press the one-touch dial key that you want to change or delete.
5
Press the Cancel/C key.
6
Using the * and ) keys, select either “EDIT” or “DELETE”, and then
press the Menu Select key.
"
If “EDIT” was selected, the group name is displayed. (Continue with
step 7.)
"
If "DELETE" was selected, the group dialing settings are deleted and
the message “SELECT REGIST.KEY” appears again. Skip to step 10.
7
If you want to change the name of the group, enter the new name, and
then press the Menu Select key.
"
For details on editing text, refer to “Entering Text” on page 214.
8
To delete the displayed recipient, press the Cancel/C key.
OR
To keep the displayed recipient, press the Menu Select key.
9
When you are finished making changes, press the Start key.
The entered information is programmed with the one-touch dial key, and
the message “SELECT REGIST.KEY” appears.
10
To change or to delete other group dialing, press the one-touch dial key,
and then repeat the procedure starting from step 5.
OR
To finish the procedure and return to the Scan mode screen, continue
pressing the Cancel/C key until the Scan mode screen is displayed.