Konica Minolta bizhub C10X - Manual (Page 58)

Print Media 44
Labels
A sheet of labels consists of a face sheet (the printing surface), adhesive, and
a carrier sheet:
„
The face sheet must follow the plain paper specification.
„ The face sheet surface must cover the entire carrier sheet, and no adhe-
sive should come through on the surface.
You can print continuously with label sheets. However, this could affect the
media feed, depending on the media quality and printing environment. If
problems occur, stop the continuous printing and print one sheet at a time.
Try printing your data on a sheet of plain paper first to check placement.
Check your application documentation for more information on printing labels.
"
43 lb bond is also referred to as 90 lb index stock.
Use label sheets that are
„
Recommended for laser printing
DO NOT use label sheets that
„
Have labels that easily peel off or have parts of the label already removed
„ Have backing sheets that have peeled away or have exposed adhesive
"
Labels may stick to the fuser, causing them to peel off and media
misfeeds to occur.
Capacity Tray 1 Up to 50 sheets, depending on their thick-
ness
Tray 2 Not supported
Driver
Media Type Labels
Duplexing Not supported