Konica Minolta magicolor 4750EN-4750DN - Manual (Page 236)

Solving Other Problems 9-29
Media is
wrinkled. The media is moist
from humidity or hav-
ing water spilled on it. Remove the moist media and replace it
with new, dry media.
The transfer roller or
fuser unit is defective. Check them for damage. If necessary,
contact Technical Support with the
error information.
Unsupported media
(wrong size, thick-
ness, type, etc.) is
being used. Use KONICA MINOLTA-approved
media. See “Media Specifications” on
page 6-2.
The date and
time is not
correctly
maintained
on the
printer. The backup battery
has reached the end
of its life. Replace the backup battery. For
details, see “Replacing the Backup Bat-
tery” on page 7-33.
The pages
that were fed
out were not
uniformly
loaded. There are large curls
in the paper. Remove the paper from the paper tray,
turn it over, and then load it again.
There are gaps
between the media
guides of the paper
tray and the sides of
the paper. Slide the media guides of the paper
tray against the sides of the paper so
that there are no gaps.
The hard
disk was
automatically
formatted. The hard disk was
full. When the control panel displays HDD
NEAR FULL
, delete print jobs and
resources (fonts, forms, etc.) which
were saved on the hard disk using
Download Manager or PageScope
Web Connection.
The Com-
pactFlash
card was
automati-
cally format-
ted. The CompactFlash
card was full. When the control panel displays MEM-
ORY CARD NEAR FULL
, delete
resources (fonts, forms, etc.) which
were saved on the memory card using
Download Manager or PageScope
Web Connection.
Symptom Cause Solution