Konica Minolta magicolor 4750EN-4750DN - Manual (Page 258)

Dual In-Line Memory Module (DIMM) 10-5
3
Slide the panel slightly to the
down and lift it off the printer.
4
Insert the DIMM at an angle
(about 45°) into the connector,
making sure that the notch on
the unit aligns with the tab on
connector, and then press down
carefully until it clicks into place.
"
Be sure to handle the
DIMM by the edges only.
"
You will hear a click when
the DIMM is properly
placed.
5
Reinstall the panel and tighten two screws.
6
Reconnect all interface cables.
7
Reconnect the power cord, and
turn on the printer.