Konica Minolta bizhub PRO 2500P - Manual (Page 22)

22 Chapter 2 Basics
Remove/replace staple cartridge
How to remove/replace staples
[13]
Step Action Description
You may remove and replace the staple cartridge while the stapler head assembly
is in place.
1 Open the top cover. [18]
2 Raise the staple
cartridge locking lever
(1) as indicated in the
drawing.
3 Gently twist the staple
cartridge (2) from side
to side, and pull out the
staple cartridge (2)
from the stapler head.
4 If the staple cartridge is
empty, discard it and
replace it with a new
one. Before replacing
the cartridge, pull at
least 20 mm (approx. 1
inch) of the staples out
and tear off at the
staple tear line (3)
which is marked on the
cartridge. If there has
been a misfeed and the
cartridge still contains
staples, pull 20 mm
(approx. 1 inch) of
staples out of the
cartridge and tear off at
the stapler tear line.
Check that the first
staple is flat. If not, tear
off another 20 mm (1
inch), using less force. [19]