Konica Minolta bizhub PRO 2500P User Manual
Page 51
51
Prepare the rotator module
Illustration
[52]
Select operation mode:
[31]
The 5 and 10 second delays prevent accidental mode changes. After changing the
operation mode, always press the Mode button "Up" to confirm "ready".
1
Auto mode
[53]
Bypass mode
Press the Mode control button 3B
for
5 seconds to select the Bypass mode.
(Lights (2 & 4) will blink and stop after 5 seconds, then let go of the button)
Bypass mode
[54]
Auto mode
Press the Mode control button 3B
for
10 seconds to select the Auto mode.
(Lights (2 & 4) will blink after 10 seconds, then let go of the button)
2
Auto mode
[55]
Rotation mode
Press the Mode control button 3A
for
5 seconds to select the Rotation
mode.
(Lights (2 & 4) will blink and stop after 5 seconds, then let go of the button)
Rotation mode
[56]
Auto mode
Press the Mode control button 3A
for
10 seconds to select the Auto mode.
(Lights (2 & 4) will blink after 10 seconds, then let go of the button)
3
Bypass mode
[57]
Rotation mode
Press the Mode control button 3A
for
5 seconds to select the Rotation
mode.
(Light 4 will switch over from Bypass mode to Rotation mode)
Rotation mode
[58]
Bypass mode
Press the Mode control button 3B
for
5 seconds to select the Bypass mode.
(Light 2 will switch over from Rotation mode to Bypass mode)