Konica Minolta bizhub PRO 2500P - Manual (Page 82)

82 Chapter 7 Troubleshooting
General
Fault codes
General
Introduction
When there is a jam or fault condition in the booklet maker system, a message will
be displayed on the booklet maker. (
see ‘Booklet maker’ on page 69 ). Some faults
can be rectified by the operator and some faults only by an authorized technician.
Fault codes that generally can be rectified by the operator:
[44]
Note: If procedures in this manual do not rectify the problem an authorized
technician will be needed.
Location Error code
Booklet maker: BM-2XX to BM-4XX
Trimmer: TR-2XX to TR-5XX
Two-side Trimmer: STR-100 to STR-150
SquareFold module: SQF-2XX to SQF-5XX
Along with the fault code, a brief description is also provided on the display.