Adjust staple and fold alignment – Konica Minolta bizhub PRO 2500P User Manual
Page 34
34
Chapter 3 Make booklets
Adjust staple and fold alignment
Adjust staple and fold alignment
Procedure
[20]
Note:
The stapler heads are fixed in one position and are not, therefore, user
adjustable
Description
[34]
If the booklets exiting the system do not have the
staples centered on the fold, or if stapling position is
desired on the top or bottom of the spine, that can be
adjusted from the control panel. With Staple On Fold
highlighted, press [+] or [-] to move staple
positioning on the spine. Press the [Enter] button.
Note:
The adjustment can also be done during booklet making.
[35]
If the booklet fold line is not in the center of the
sheet, or if it is desirable to move the fold line to
match the print, that can be adjusted from the control
panel. Contrary to the above situation, this
adjustment moves both the staple and fold together.
With Staple Fold Pos highlighted, press [+] or [-] to
move the staple and fold line position. Press the
[Enter] button.