Konica Minolta bizhub PRO 2500P - Manual (Page 26)

26 Chapter 2 Basics
Remove/replace stapler head
6 Before inserting the
stapler head, center the
stapler lift bracket (1)
over the area that will
receive the stapler
head. Ensure that the
staple driver post (2) is
in its uppermost
position. [24]
[25]
7 Place the stapler head
back into the Booklet
maker. The driver post
arm (2) must be placed
into the stapler lift
bracket (1).
Caution
If the driver post arm is not
correctly positioned into the
stapler lift bracket (2), it will
cause permanent damage to the
stapler head as well as the
bracket. Subsequently, future
correctly mounted stapler heads
will also be damaged.
8 Press on the lower
front edge of the
stapler head to align
the hole (3) in the
stapler bracket with the
hole in the stapler
head. Insert the locking
pin (4) so that it
engages the stapler
head and the metal
sides of the stapler
assembly.
Step Action Description