Control panel, Action – Konica Minolta bizhub PRO 2500P User Manual
Page 17
17
Control panel
Control panel
[11]
Action
[13]
The Main screen.
When the system power is switched on, the Main
screen will be shown. Here you will find information
showing the actual set-up. From this screen you can
also access other screens that will help you operate
the complete Booklet making system. At the top,
throughout the screens, you can see the current state
of the machine and the current job.
[14]
Changing settings.
To change or adjust settings: Select an item in the
Main screen with the [arrow] button and press the
[Enter] button. For example you can (finely) adjust
the trimming, change stapling mode, or set the
SquareFold module to the correct mode. Settings are
explored more thoroughly in section 2, Making
Booklets.
[15]
The Admin screen.
Pressing the [Admin] button in the Main screen takes
you to the Admin screen. From here you can change
the display language, set paper size standard, and
more. (
), for how to
navigate in the Admin screen.
[16]
The Jobs screen.
Pressing the [Jobs] button in the Main screen opens
the Jobs screen. From here you customize and save
job settings. Press [Jobs] again and you can load
previously saved jobs. (