Adjust fold quality – Konica Minolta bizhub PRO 2500P User Manual
Page 35
35
Adjust fold quality
Adjust fold quality
Introduction
If the adjustments from the control panel result in inconsistencies or inaccuracies it
could be due to paper quality and/or set size. For those cases, it is possible to change
the ball configuration in the ball cages in the pre-fold transport. The purpose is to
apply adequate pressure on the set to ensure proper alignment against the fold stop
before the set is folded. The default configuration for the Booklet maker is with glass
balls closest to the outfeed and plastic balls closest to the infeed. Additional
replacement steel, glass, and plastic balls are located in the tool box above the fold
section. See Ball Configuration Guidelines table.
Note:
The table below is meant purely as a guide. Other configurations might work
better depending on the characteristics of the paper quality in conjunction with the
set size.
[36]