Konica Minolta bizhub PRO 2500P - Manual (Page 57)

57
"Not Ready" Status indicator
Problem solving
"Not Ready" Status indicator
The "Not Ready" indicator blinks if an error has occurred in the rotator module, or
in one of the finishers placed behind the rotator module.
Generally, "Not Ready" messages are displayed on all finishers before the finisher
having the error. This means that when an error occurs, it must be solved on the
finisher last in line first. If no additional errors are detected in the rotator module,
and all errors in finishers behind the rotator module are solved, the rotator module
will automatically assume the "Ready" position, and will communicate
correspondingly to the printer or other finishers before the rotator module.
In short, this means that errors only need to be solved in the module actually having
the error. All other modules will automatically detect when an error in another
module has been cleared.