Konica Minolta bizhub 364e - Manual (Page 11)

Getting Started 2
AU-211P 10
2.3 Pre-Setting
To use this system, pre-configure the following settings on the MFP.
- Configuring network settings (page 10)
- Registering Active Directory for Authentication (page 12)
- Correcting the MFP time (page 13)
- Registering the DNS server associated with Active Directory
(page 14)
- Specifying the PIV transitional mode (page 16)
- Configuring settings for verifying the Active Directory certificate
(page 17)
2.3.1 Configuring Network Settings
Configure the basic settings required to use the MFP in a network
environment.
TCP/IP Settings
On the MFP control panel, tap [Utility] - [Administrator Settings] - [Network
Settings] - [TCP/IP Settings].
IPv4 Settings
Item Description
ON/OFF Select [ON].
Item Description
IP Application Method Select whether to automatically retrieve the IP address
or directly specify it.
Auto Input When automatically retrieving the IP address, select the
automatic retrieval method.
IP Address When directly specifying the IP address, enter the IP
address of the MFP.