Konica Minolta bizhub PRO 2000P User Manual
Page 15
15
Enter the Job Settings
Procedure for a New Job
[5]
Procedure for a Saved Job
1.
Touch LOAD & SAVE
Step
Action
Information
1
Touch BASIC
2
Enter the paper
size
Touch PAPER SIZE. Enter the dimensions of the
paper.
The job setting is easier if you first select a preset
paper size, then adjust the settings as necessary
Touch PAPER SIZE > PRESETS > A3 or A4. (USA:
11x17, 8.5x11 or 8.5x14)
3
Enter the page
direction
Touch PAGE DIRECTION > LANDSCAPE or
PORTRAIT.
If the PAGE DIRECTION option is not available, the
PAGE DIRECTION cannot be changed.
4
Enter the page
rotation setting
For A4 paper size, the normal setting for ROTATE is
ON. Rotation lets the printer operate at optimum
speed.
Touch ROTATE to turn the sheet rotation ON or OFF.
Always select the page direction before you change
the rotate setting.
5
Enter the set
thickness.
Touch SET THICKNESS. Enter the measured value.
6
Enter the number
of stitches.
Touch STITCHES and enter the number of stitches.
If needed, the stitch pitch can be changed. See
"STITCH PITCH,"
7
Enter the spine
form setting
The spine form setting is automatic, according to the
SET THICKNESS setting. If needed, the setting can
be changed. See "FORM" in
8
Enter the trim
setting.
The trim setting is automatic, according to the PAGE
SIZE and SET THICKNESS settings. To change the
setting, touch TRIM. See “TRIM” in
9
Touch CLOSE
If needed, save the
job settings to
memory.
If the same job settings are used frequently, then save
the job settings to memory.
See "Save a job."