Konica Minolta bizhub PRO 2000P User Manual
User manual
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- BLM 500 / Bookletmaker 50
- Copyright
- Table of Contents
- Chapter 1 Introduction to the Booklet maker
- Chapter 2 How to run the Booklet maker
- Chapter 3 The User Interface
- Chapter 4 Standard Tasks
- Load and Save the Job Settings
- Adjust the Stitch Pitch
- Open the Connecting Bridge Cover
- Open and Close the Folder Cover
- Lift and Lower the Clincher Frame
- Open the Gathering Area Cover
- Lift the Booklet maker Main Deck
- Empty the Trim Bin
- Open the Stitch Wire Cabinet
- Adjust the Stacker
- Operate the Booklet maker offline
- Chapter 5 Error Conditions, Problems, and Solutions
- Chapter 6 Maintenance
- About Maintenance
- Booklet maker cleaning
- Clean the Static Elimination Bars
- Clean the Former Roller
- Clean the Polyurethane Strips in the Form Clamp
- Clean the Trimmings Removal Fingers
- Clean excess grease from the Stitch Head
- Lubricate the Stitch Head
- Lubricate the Wire-feed Cam
- Install New Stitch Wire
- Appendix A Specifications
- Appendix B Declaration of Conformity