Konica Minolta bizhub PRO 2000P - Manual (Page 106)

106 Chapter 6 Maintenance
Lubricate the Wire-feed Cam
Lubricate the Wire-feed Cam
Introduction
[65]
[65] Lubricate the wire-feed cam
[60]
Lubricate the wire-feed cam
[61]
A
B
C
A Nozzle for the tube of grease
B Wire-feed cam
C Feed lever
Step Action Information
1. Lift the PSQ main deck.
2. Apply 10 mm of grease from
the tube between the bearing
surface of the wire-feed cam
and the feed lever. figure 65
[66]
3. Lower the Booklet maker main
deck
4. Lower the clincher frame. Lower the Clincher Frame on
page 39
5. Close all of the covers
0.4"