Clean the static elimination bars, Bars, See ‘ clean the static – Konica Minolta bizhub PRO 2000P User Manual
Page 92
92
Chapter 6 Maintenance
Clean the Static Elimination Bars
Clean the Static Elimination Bars
Introduction
Clean the static elimination bars every week. This action extends the performance
and service life of the static elimination bars.
The Booklet maker is supplied with a small brush. Use the brush to clean the static
elimination bars.
There are three static elimination bars.
■
One in the connecting bridge
■
Two in the gathering area
[48]
[48] The Static Elimination Bars in the Gathering Area
[49]
[49] The Static Elimination Bar in the Connecting Bridge
[47]
Note:
On the bottom of the static elimination bar there is a row of sharp pins. The
pins are not dangerous, but if you touch the pins accidentally, this action can alarm
you.
A
A
A
Static Elimination Bars