Konica Minolta bizhub PRO 2000P - Manual (Page 37)

37
Open and Close the Folder Cover
Open and Close the Folder Cover
Introduction
If a machine error occurs, or for maintenance.
■ To access the stitch area
■ To access the folder area
Note: The folder cover has an interlock switch. The Booklet maker stops if you open
the folder cover.
[14]
[14] Unlock and lock the Folder Cover.
Open the Folder Cover
1. Lift the black locking handle against the spring pressure.
2. Turn the handle through 90° to unlock.
3. Lift the folder cover carefully to the vertical position.
Close the Folder Cover
Caution: Check that the folder cover will not hit the clincher frame locking
handle when you close the folder cover. If necessary, lift and rotate the
clincher frame locking handle to a new position
figure 16 on page 38 .
1. Lower the folder cover.
2. Turn the handle through 90° to lock.
3. Close the locking handle to lock the folder cover.