Clear a stitch head jam, Clear a – Konica Minolta bizhub PRO 2000P User Manual
Page 80
Advertising
80
Chapter 5 Error Conditions, Problems, and Solutions
Clear a Stitch Head Jam
Clear a Stitch Head Jam
Introduction
The error message JAM IN STITCH HEAD is displayed.
This may be caused by
■
the SET THICKNESS setting is incorrect
■
the stitch head is jammed by broken wire
■
the stitch head needs lubrication
Do Procedure 1. If the error message continues, do Procedure 2.
Advertising
This manual is related to the following products: