Konica Minolta bizhub 42 - Manual (Page 22)

bizhub 42/36 2-7
2.2 Enhancing the Security Function 2
Setting the Enhanced Security Mode
0 For the procedure to call the Admin Settings on the display, see page 2-2.
0 Do not leave the machine with the setting screen of Admin Settings left shown on the display. If it is
absolutely necessary to leave the machine, be sure first to log off from the Admin Settings.
0 The Enhanced Security Mode is factory-set to [OFF]. Be sure to turn [ON] the Enhanced Security Mode
so as to enable the security function of the machine.
1
Call the Admin Settings on the display from the control panel.
2
Touch [ ↓].
3
Touch [Security Settings].
4
Touch [Enhanced Security Mode].
5
Select [ON] to enable the Enhanced Security Mode and touch [OK].
Touch [OK], then the machine restarts automatically.