Konica Minolta bizhub 42 - Manual (Page 35)

bizhub 42/36 2-20
2.8 Changing the Administrator Password 2
2.8 Changing the Administrator Password
When access to the machine by the Administrator of the machine through the Admin Settings from the control
panel is authenticated, the machine enables the operation of changing the Administrator Password required
for accessing the Admin Settings.
The Administrator Password entered for the authentication purpose appears as "*" on the display.
Changing the Administrator Password
0 For the procedure to call the Security Settings screen on the display, see steps 1 through 3 of page 2-7.
0 Do not leave the machine with the setting screen of Admin Settings left shown on the display. If it is
absolutely necessary to leave the machine, be sure first to log off from the Admin Settings.
1
Call the Security Settings screen on the display from the control panel.
2
Touch [Administrator Password].
3
Touch the upper [Password].
4
Enter the new 8-digit Administrator Password from the keyboard or keypad.
% Press the [C] key to clear all characters.
% Touch [Delete] to delete the last character entered.
% Touch [ ↑] to show the upper case screen.