Konica Minolta bizhub 42 - Manual (Page 85)

bizhub 42/36 4-4
4.1 PageScope Data Administrator 4
4.1.2 Setting the user authentication method
0 If the IC card function has been set, the user authentication method cannot be changed.
0 For the procedure to access the machine, see steps 1 through 5 of page 4-2.
0 Do not leave the site while you are gaining access to the machine through PageScope Data Adminis-
trator. If it is absolutely necessary to leave the site, be sure first to log off from the PageScope Data
Administrator.
1
Access the machine through [Authentication Settings/Address Settings] mode of PageScope Data Ad-
ministrator.
2
Click [Authentication settings].
3
Click [User authentication].