Konica Minolta MAGICOLOR 2300 - Manual (Page 160)

Interface Panel 150
Power Requirements
WARNING!
Connect the power plug to an outlet with the same rated voltage as the
printer. No other devices should be connected to this outlet, as
overheating could cause fire or electric shock. The printer draws 13 A at
100 V, 11 A at 120 V, or 7 A at 220–240 V. Your printer requires a properly
grounded AC outlet. The grounding terminal on the power cable should
be connected to a good earth ground to prevent electric shock and fire.
"#
In compliance with UL guidelines, “The appliance inlet is considered to
be the main disconnect device.”
Input Power Japan 100 VAC; 50/60 Hz ±3%
North America 120 VAC; 50/60 Hz ±3%
Europe
220–240 VAC; 50/60 Hz ±3%
Latin America 115/120 VAC; 50/60 Hz ±3%
220–240 VAC; 50/60 Hz ±3%
Notes: Amperage capacity is at least 1.2 times that used
by the printer.
Voltage
Fluctuation
Rate and Rated
Line Voltage Japan 100 VAC ±10%
North America 120 VAC ±10%
Europe
220–240 VAC ±10%
Latin America 120 VAC ±10%
220–240 VAC ±10%
Notes: 10% of the rated line voltage for proper operation.
Frequency
Variation Rate Within 50–60 ±3 Hz
Maximum
Electrical
Current Required during operation is 8 amps for a 100 V or a 120 V
system and 4 amps for a 220–240 V system.
Noise-
generating
Equipment Should not be connected to the same electrical outlet as
the printer.
Grounding Your printer requires a properly grounded AC outlet.