Konica Minolta magicolor plus - Manual (Page 10)

E-10
Menu Screen Names and Functions
Copyboard Firmware Update:
Use this to update the Captureboard’s internal
program. (See page E-31.)
Header/Footer:
This is used for the creation or editing of headers and
footers. See Page E-23
(1) Select image for projection:
Selects the number of the monitor that is con-
nected to the projector.
The default setting is “Display 1”. This software
automatically searches for the number of con-
nected monitors.
(2) Select color for positioning:
Selects the color of the ○ mark that detects the
position of the projection image of the projector.
Select from among No specific color selected,
Red, Green, Blue, Black. The default setting is “No
specific color selected”.
The setting contents will not be stored unless the
screen is closed by clicking the [OK] button.
(3) OK
Enters the setting.
(4) Close:
Closes the settings screen.
(1)
(2) (3) (4)
Capture Settings:
These settings are used when creating superim-
posed images. See page E-18.