Konica Minolta magicolor plus - Manual (Page 18)

E-18
Click the (Settings) Icon of the Menu
The settings screen will open.
These settings perform the selection of the monitor that is connected to the projector and the selection of the
○
mark color used for position detection.
Select the Number of the Monitor that Is
Connected to the Projector that Projects to
the Captureboard
This is set when a personal computer that can accept the connec-
tion of multiple monitors and a projector are connected. There is no
need for this setting when there is only one monitor.
Clicking [ ▼] of the [Select image for projection] column will display a
list. Click the desired monitor number from this list.
This software automatically searches for the number of connected
monitors.
When the number of the monitor is not known, click “Screen Properties” → “Settings” → “Identification” on the
personal computer and check the number of the monitor that is connected to the projector.
Note
Change the Setting of the
○ Mark Color
Used for Display Position Detection of the
Projected Image of the Projector
Clicking [ ▼] of the [Select color for positioning] column will display
a list.
Click the target color from among No specific color selected, Red,
Green, Blue, Black.
• When “No specific color selected” has been selected, an arbitrary marker color from among the four colors of
red, green, blue, and black can be used for drawing the positioning mark. Recognition is judged solely by the
shape of the
○ mark that has been drawn with the marker.
Writing or drawing a diagram that resembles the ○ mark may result in a position of the projection screen that
cannot be properly recognized.
• When one color has been selected from among “Red, Green, Blue, Black”, the same marker color as the
selected color can be used for drawing the positioning marks. Recognition is judged by the color and shape of
the
○ mark that has been drawn with the marker.
Using the same color marker for writing or drawing a diagram that resembles the ○ mark may result in a posi-
tion of the projection screen that cannot be properly recognized.
Note
Capture Settings