Konica Minolta magicolor plus - Manual (Page 16)

E-16
Step 7 (continued)
This permits the saving of the superimposed image of the hand written and drawn image data of
the Captureboard sheet surface and the projector projection image.
Using this saved image, a meeting report or document can be created.
Printing
Printing is performed by the printer that is connected to the personal
computer.
ቢ Select [Print (P)] from [File (F)] of pull-down menu.
The printing settings screen will open.
ባ Clicking the [Print] button will print the selected image.
Clicking the [Detailed Settings] button for settings.
This screen will differ depending on the printer.
The superimposed image cannot be printed directly using
the Captureboard and the printer connected to it (which is
sold separately).
Note
Closing
Clicking (Close) will close the superimposed image dis-
play screen.
Closing the superimposed image without saving it will result
in the loss of the image.
To capture with the next sheet surface, proceed from Step
4.
Closing this Software
Clicking (Close) of the main menu will close this
software.
When PLUS TOOLBOX is running or its icon appears on the Windows task bar, and
the picture data is attempted to be captured using other TWAIN compatible applica-
tion software, below error message may pop up.
In this case, right-click the PLUS TOOLBOX icon on the task bar to quit the program
and start capturing procedure using other TWAIN compatible software.
When other TWAIN compatible applications are used to capture the picture data, while PLUS
TOOLBOX software is running, following procedure should be taken.
Notice
Basic Operation