Konica Minolta magicolor plus - Manual (Page 29)

E-29
Transferring the header/footer file to the
Captureboard
Click the [Transfer] button.
This starts the transfer. The verification screen will be displayed
when the transfer is completed. Click [OK].
• During the transfer [HF] will flash in the display window of the
Captureboard.
Transfer to the Captureboard is completed.
When closing this software, see step 9 on page E-16.
Updating the Header/Footer Information
Press the [Save] button of the Captureboard control panel.
The flashing [HF] of the Captureboard display window will
change to the [H1] display.
This completes the update.
Press a button other than "Save" or "Feed" on the main
unit's control panel.
[H1] of the Captureboard display window will change to the
[PC] display and the normal mode will be set.
To return to the header/footer default setting (i.e., only the
date and time display), press the “Feed/Stop” button.
The display will change to the [H0] display of the
Captureboard display window.
Open the header/footer file
① Establish a USB connection between the Captureboard and the personal computer. See Page E-5 for information
about the connection
② Click the main menu [Setup] button → [Header/Footer] tag, and display the “Header/Footer” screen.
③ Clicking [Open file] will display the “Open file” screen of the personal computer. Select the target header/footer file
(having the .hfd extension), and click the [Open File] button of the “Open file” screen.
Two ways of updating the information are available. One way is to transfer the information to the Captureboard
by connecting the Captureboard and personal computer via a USB connection. The other way is to save the
information in USB memory and then insert the USB memory directly in the USB port of the Captureboard.
Updating by Establishing a USB Connection between the Captureboard and the Personal Computer
Updating the Internal Header/Footer Information of the Captureboard
Creation and Editing of Headers/Footers