Konica Minolta KIP 3100 - Manual (Page 22)

Chapter 2 Basic Operation 2-2
2. 1 Turning on KIP 3100
1. Ensure the KIP 3100 is plugged into a dedicated
wall outlet.
2. There is a Power Switch on the right side of KIP 3100.
Press the “ I ” side to turn on the KIP 3100.
Power Switch Press this side.
WARNING
(1) Do not handle the Power Plug with wet hands, or you may receive an electrical shock.
(2) Make sure to ground the machine for your safety.
(3) Do not plug the printer into a multi-plug connector in which other devices are
plugged. It may overheat the outlet and may result in a fire.
(4) The outlet must satisfy the following conditions.
In U.S.A. : 120V plus/minus 10%, 50/60Hz and 15A
In Europe : 220-240V plus 6% or minus 10%, 50/60Hz and 10A