Konica Minolta KIP 3100 - Manual (Page 45)

Chapter 3 Error Correction 3-7
3. 1. 1. 4 Fuser Jam
1. Open the Engine Unit by pulling up both Engine Unit Open Levers (1).
2. Remove the mis-fed paper if seen.
3. Close the Engine Unit firmly.
Refer to the next page when the mis-fed paper cannot be seen or removed.
NOTE
Be sure to close the Engine Unit firmly until it is locked at the correct position.
NOTE
Do not open the Engine Unit when the Scanner Unit is opened.
If the Scanner Unit is opened, it will hit the bottom of User Interface.
1