Konica Minolta KIP 3100 - Manual (Page 37)

Chapter 2 Basic Operation 2-17
2. 8 Canceling Sleep Mode
The KIP 3100 has two Sleep Modes to reduce the power consumption.
The KIP 3100 will enter into Sleep Mode after a certain period of inactivity.
In the default setting;
• Warm Sleep Mode will start after a 15 minute period of inactivity. This mode will reduce the
power supplied to the Fuser Unit.
• Cold Sleep Mode will start after a 60 minute period of inactivity. This mode will stop the power
supplied to the Fuser Unit and some other components.
The Sleep Mode is canceled and the machine goes to ready condition when;
• the machine receives a print job through the network.
• the UI is touched and an original is inserted into the scanner.
See Part 7 [4.2.1 Power Save Settings] on page 7-9 for further information.
NOTE
(1) It may take time for the machine to get ready.
(2) Touching the UI will quickly cancel the screensaver. It may take more time to warm up
the machine for copying / printing.