Konica Minolta KIP 3100 - Manual (Page 28)

Chapter 2 Basic Operation 2-8
6. Insert the leading edge of the roll media under Guide Plate (5) until it touches the feeding roller.
Rotate Feed Knob (6) clockwise so that the feeding rollers catch the leading edge.
NOTE
Use the rear Feed Knob (7) for Roll Deck 2.
NOTE
(2) The outside rim of the Flange should meet the black triangle marked on the Slide Guide.
Otherwise the roll media may fall into the Roll Deck or result in incorrect media feeding.
Correct Wrong
Mark
Rim
Mark
Rim
5
6
7