Konica Minolta BIZHUB 223 - Manual (Page 159)

bizhub 423/363/283/223 8-19
8.5 Restricting the use of the SMB address registered in the address book 8
8.5.1 [TCP/IP Settings]
Configure settings to use this machine in the TCP/IP network environment.
- To specify the destination computer with the computer name (host name) for SMB transmission in IPv6
environment, prepare a DNS server and configure DNS settings in this machine.
For details, refer to page 2-2.
8.5.2 User Authentication
Configure settings to restrict users who use this machine.
For details, refer to the following reference pages.
- "Restricting users of this machine (MFP authentication)" (p. 7-2)
- "Restricting users of this machine (Active Directory)" (p. 7-10)
- "Restricting users of this machine (Windows domain or workgroup)" (p. 7-15)
- "Restricting users of this machine (NDS over TCP/IP)" (p. 7-22)
- "Restricting users of this machine (LDAP)" (p. 7-25)
8.5.3 [Scan to Authorized Folder Settings]
Configure settings to restrict the specification of addresses that users directly enter.
For details, refer to page 8-42.
8.5.4 [Client Setting]
Configure SMB client settings.
For details, refer to page 4-3.
8.5.5 [WINS Setting]
To perform SMB transmission via routers, configure the WINS server settings.
For details, refer to page 4-4.
8.5.6 [Direct Hosting Setting]
To perform SMB transmission in an IPv6 environment, enable the Direct Hosting service.
For details, refer to page 4-5.
8.5.7 [LLMNR Setting]
To perform name resolution in the environment configured to communicate with Windows Vista/Server
2008/7, and where the DNS server is not running, enable the LLMNR function.
For details, refer to page 4-5.