1 [tcp/ip settings, 2 [web service common settings, To vista/server 2008/7 -21 – Konica Minolta BIZHUB 223 User Manual
Page 161: Tcp/ip settings] -21, Web service common settings] -21
bizhub 423/363/283/223
8-21
8.7
Using Web services to establish an SSL communication from this machine to Vista/Server 2008/7
8
8.7
Using Web services to establish an SSL communication from this
machine to Vista/Server 2008/7
Configure settings to use the encrypted SSL communication from this machine to a computer running on the
Windows Vista/Server 2008/7 in a Web services environment. Security of Web services communication can
be enhanced using the SSL protocol encryption.
When you configure the SSL communication settings, check the following points.
-
To use the encrypted SSL communication between this machine and the computer, you must set the
bidirectional SSL communication between them. For details on configuring settings to establish an SSL
communication from Windows Vista/Server 2008/7 to this machine, refer to page 8-20.
-
Create a certificate at the computer first, and then associate the TCP/IP communication port (the de-
fault port number is 5358).
Use the following flowchart to configure settings. Clicking a step jumps to the associated procedure.
8.7.1
[TCP/IP Settings]
Configure settings to use this machine in the TCP/IP network environment.
For details, refer to page 2-2.
8.7.2
[Web Service Common Settings]
In the administrator mode of PageScope Web Connection, select [Network] ö [Web Service Settings] ö
[Web Service Common Settings].
Finish
Item
Description
Prior check
[Friendly Name]
Enter a Friendly Name (up to 62 characters).
[SSL Setting]
Select [ON].
[Publication Serv-
ice]
If you use this machine in an environment where NetBIOS
is disabled or only the IPv6 protocol communication is
used by the Windows Vista/Server 2008/7 system, set this
item to [Enable].
The Publication Service function can detect up to 512
destinations, including those detected with the NetBIOS
service.
[Certificate Verifi-
cation Level Set-
tings]
To verify the certificate, configure settings to verify the
certificate.
[Validity Period]
Select whether to check that the target certificate is within
the validity period.
[Key Usage]
Select whether to check that the certificate is used ac-
cording to the purpose approved by the issuer.
[Chain]
Select whether to check that the certificate chain (certifi-
cation path) is correct.
The chain is validated by referencing the external certifi-
cates managed on this machine. For details, refer to
page 8-34.
[Expiration Date
Confirmation]
Select whether to check that the target certificate is within
the validity period.
The OCSP service and CRL (Certificate Revocation List)
are checked in this order when the expiration date of the
certificate is checked.