Konica Minolta BIZHUB 223 - Manual (Page 74)

bizhub 423/363/283/223 5-2
5.1 Printing (LPR/Port9100) 5
5 Printing
5.1 Printing (LPR/Port9100)
Configure settings for LPR or Port9100 printing.
LPR printing is performed via the network using the LPR protocol. It is mainly used in UNIX-based operating
systems.
Port9100 printing is performed via the network by directly specifying the RAW port (Port9100) of this machine
connected to the TCP/IP network as a destination printer.
Use the following flowchart to configure settings. Clicking a step jumps to the associated procedure.
d
Reference
For details on how to install the printer driver, refer to the [User's Guide [Print Operations]].
5.1.1 [TCP/IP Settings]
Configure settings to use this machine in the TCP/IP network environment.
For details, refer to page 2-2.
5.1.2 [LPD Setting]
In the administrator mode of PageScope Web Connection, select [Network] ö [TCP/IP Setting] ö [TCP/IP
Setting].
[TCP/IP Settings]
(1) LPR printing
(2) Port9100 printing
(1) (2)
[LPD Setting] [RAW Port Number]
Finish
Item Description Prior check
[LPD] Select [Enable].