Selecting the paper source -8 – Konica Minolta bizhub 750 User Manual
Page 143
Advertising
Setting Up the PCL Driver
5
IC-202
5-8
Selecting the Paper Source
Paper source can be changed or paper type can be set as follows.
1
Click the Setup tab.
2
Select a paper source to be used with [Paper Source].
–
Follow the procedure below to set the paper type for the “Paper
source”.
–
When using Transparency Interleave, refer to p. 5-10.
3
Click the [Paper Type Settings].
4
Select the “Paper Source” being changed, and then click the [Edit Pa-
per Type].
Advertising
This manual is related to the following products: