Setting the file margin -14 – Konica Minolta bizhub 750 User Manual
Page 149
Advertising
Setting Up the PCL Driver
5
IC-202
5-14
Setting the File Margin
File margins are added to the document before it is printed.
1
Click the Setup tab.
2
Select the [File Margin] check box.
3
To set the width of the file margin, click the [Details], and then specify
the desired settings in the File Margin Details dialog box that appears.
Front Side/Back Side: Sets the file margin values. By clearing the [Save
Value for Front and Back Sides] check box, you can specify separate
values for the front and back sides.
Shift Mode: Selects the printing process for the document.
Advertising
This manual is related to the following products: