Konica Minolta bizhub 750 - Manual (Page 28)

Overview 1
IC-202 1-6
Printing Flow
When using this printing system as a printer, the flow of the main process is
described below.
Print commands transmitted from the application are received by the printer
driver.
Data is transmitted to this machine over a parallel interface (IEEE 1284) when
this machine is used as a local printer, over a USB interface when this ma-
chine is used as a USB printer, or over an Ethernet interface (TCP/IP, IPX/
SPX, NetBEUI, AppleTalk or Bonjour/Rendezvous) when this machine is
used as a network printer. The data is then delivered to the printing system,
which performs image rasterization (development of output characters and
images to bitmap data). Finally, this data is printed from this machine.