Konica Minolta bizhub 750 - Manual (Page 234)

Setting Up the KONICA MINOLTA PS Driver (Windows) 6
IC-202 6-38
6.5 Specifying the PostScript Tab Settings
Output of Job
Set whether to output the job to the printer, or as a Encapsulated PostScript
file.
1
Click the PostScript tab.
2
Select [To Printer] or [Encapsulated PostScript] from the job output.
2
Note
When you select [Encapsulated PostScript], you should set the File
Name. Click and set a file name. If you do not a file name here, you
will be prompted to enter a file name each time you print.
Compressing the Job
Set whether or not to compress the job as follows. Print data is compressed
so that the printing speed is a little improved.
1
Click the PostScript tab.
2
Select [LZW] or [Flate] from the [Job Compression] pull down list in the
Setting.
– If you select [Flate], then you can select the Flate compression type
from the [Flate Compression] pull down list.