Konica Minolta magicolor 3730DN - Manual (Page 141)

Solving Other Problems 7-26
Not all pages
print. The printer has the
wrong kind of cable,
or the printer is not
configured for the
correct cable and
port. Check your cable.
The Cancel key was
pressed. Make sure no one pressed the Cancel
key while your job was printing.
The tray is empty. Check that the trays are loaded with
media, in place, and secure.
A document is printed
with an overlay file
which has been cre-
ated by an unsuit-
able driver. Print the overlay file using a suitable
driver.
The machine tried to
feed paper from Tray
2 while paper is
loaded into Tray 1. Paper cannot be fed from Tray 2 if
paper is loaded into Tray 1. In order to
use Tray 2, remove all paper from Tray
1.
Printer
resets or
turns off fre-
quently. The power cord is not
correctly plugged into
the outlet. Turn off the printer, confirm that the
power cord is correctly plugged into the
outlet, and then turn on the printer.
A system error
occurred. Contact Technical Support with the
error information.
Symptom Cause Solution