Konica Minolta magicolor 3730DN - Manual (Page 46)

Media Specifications 4-3
"
For custom sizes, use the printer driver to specify the settings within
the ranges shown in the table on previous page.
"
When using a custom paper size with Tray 2, the structure of the tray
allows paper with a width greater than 210 mm (8.25") to be loaded
with the trailing edge curled when the length is greater than 279 mm
(11.0") (maximum length is 297 mm (11.7")).
When using these custom paper sizes, use the manual feed tray; oth-
erwise, load no more than 100 sheets in Tray 2.
Notes: *Tray 1= Manual feed tray
**Although the maximum supported width is 216.0 mm (8.5”), the Envelope DL size (width: 220
mm (8.7”)) can be fed.
***The minimum possible size for duplex (double-sided) printing is 182.0 x 254.0mm (7.2” x
10.0”).
The maximum possible size for duplex (double-sided) printing is 216.0 x 356.0mm (8.5” x
14.0”).
****The minimum possible size for duplex (double-sided) printing is 182.0 x 254.0mm (7.2” x
10.0”).
The maximum possible size for duplex (double-sided) printing is 216.0 x 297.0mm (8.5” x
11.69”).