Konica Minolta magicolor 3730DN - Manual (Page 35)

ENGINE 3-10
"
All factory default values are shown in bold.
ENERGY
SAVER
Settings
120 minutes/60 minutes/30 minutes/
15minutes
Specify the length of time until the machine enters Energy
Saver mode.
"
The machine does not enter Energy Saver mode if
paper has been loaded into Tray 1.
AUTO
CONTINUE
Settings
ON /OFF
Select whether or not printing continues if the size or type of
media in the selected tray is different from the size or type of
media for the print job.
If AUTO CONTINUE is set to ON , printing automatically
continues if any of the following occur. Printing will be
performed even if the media size is different.
Different media size/type: SIZE MISMATCH (page 7-36)/
TYPE MISMATCH (page 7-37)/ PUT MEDIA: TRAY X
(page 7-40)
ENGINE
SERVICE
TOTAL FACE
COUNT
Displays the total page side counter.
COLOR FACE
COUNT
Displays the total page side counter for
color printing.
BW FACE COUNT
Displays the total page side counter in
black-and-white printing.
BOOT VER.
Displays the boot version.
FPGA VER. Displays the FPGA version.
CONTROLLER
VER.
Displays the controller version.
ENGINE VER. Displays the engine version.
COLOR
CALIBRATION
Settings YES /NO
If YES is selected, color calibration is
performed.