Replacing the transfer belt unit tf-p05, Replacing the transfer belt unit tf-p05 -20 – Konica Minolta magicolor 3730DN User Manual
Page 91
Advertising
Replacing Consumables
5-20
Replacing the Transfer Belt Unit TF-P05
When the time to replace the transfer belt unit is reached, the message
TRANSFER END
appears. Printing can continue even after this message
appears; however, since the print quality is reduced, the transfer belt unit
should be replaced immediately.
1
Turn off the printer and discon-
nect the power cord and inter-
face cover.
2
Open the printer’s front cover.
Advertising