Konica Minolta magicolor 3730DN - Manual (Page 67)

Duplexing 4-24
Duplexing
Select paper with high opacity for duplex (double-sided) printing. Opacity
refers to how effectively paper blocks out what is written on the opposite side
of the page. If the paper has low opacity (high translucency), then the printed
data from one side of the page will show through to the other side. Check
your application for margin information. For best results, print a small quantity
to make sure the opacity is acceptable.
Note
Only plain paper and thick stock, 60–210 g/m 2 (16–55.9 lb bond) can be
autoduplexed. See “Media Specifications” on page 4-2.
Duplexing envelopes, letterhead, labels, postcards or glossy media is
not supported.
How do I autoduplex?
Duplex (double-sided) printing can only be performed with the magicolor
3730DN.
Check your application to determine how to set your margins for duplex
(double-sided) printing.
The following Binding Position settings are available.
If “Short Edge” is selected, the pages will be laid out to flip
at the top.
If “Long Edge” is selected, the pages will be laid out to flip
at the side.
1
3
1
2
1
1 1
1
1
2
3