Konica Minolta bizhub 500 - Manual (Page 14)

1
Before making copies
1-4 bizhub 500/420
Be
fo
re
m
a
k
ing
c
o
p
ies
Chap
te
r 1
7 [Reset] key Press to clear all settings (except
programmed settings) entered in the
control panel and touch panel.
8 Sub power
switch Turns on/off the copying scanning
functions.
Turning it off will terminate all the
functions other than the printing and
fax functions, and enter the sleep
mode.
9 [Proof Copy] key Press to print a single proof copy to be
checked before printing a large
number of copies. (See p. 5-14.)
10 [Stop] key Pressing the [Stop] key during an
operation temporarily stops the
operation.
11 [Start] key Press to start an operation. When this
machine is ready to begin an
operation, the indicator on the [Start]
key lights up in green. If the indicator
on the [Start] key lights up in orange,
the operation cannot begin.
Press to restart a stopped job.
12 Main Power
indicator Lights up in green when the machine
is turned on with the main power
switch.
13 Data indicator Flashes in green while a print job is
being received.
Lights up in green when a print job is
queued to be printed or while it is
being printed.
No. Part name Description