Konica Minolta bizhub 500 - Manual (Page 55)

Using copy functions
2
bizhub 500/420 2-19
U
s
in
g cop
y
fu
nct
ion
s
Ch
ap
te
r 2
2.5 Selecting a Simplex/Duplex
setting
The type of original and copy can be specified.
The following Simplex/Duplex settings are available.
*1
If [2 1] or [2 2] is selected, select the position of
the binding margin and the orientation of the loaded
original, otherwise the copies will not be printed as
desired.
For details on selecting the position of the binding
margin for the original, refer to “Selecting the
position of the binding margin (“Margin” settings)”
on page 1-24.
For details on selecting the original orientation, refer
to “Selecting the original orientation (“Original
Direction” settings)” on page 1-22.
Setting Description
1 1 Select this setting to produce single-sided copies
from single-sided originals.
1 2 Select this setting to produce one double-sided
copy from two single-sided originals.
2 1
*1
Select this setting to produce two single-sided
copies from one double-sided original.
2 2
*1
Select this setting to produce double-sided copies
from double-sided originals.