Konica Minolta bizhub 500 - Manual (Page 119)

Using fax functions
4
bizhub 500/420 4-13
Us
ing fax
func
tions
Ch
apt
e
r 4
– [Pause]: Touch this key to insert a pause when
dialing. Touch [Pause] once to insert a 1-second
pause. In addition, multiple pauses can be
entered. “P” appears in the screen. If the PBX
(private branch exchange) connection is set to
“ON”, touch [Pause] after the outside line access
code (for example, “0”) for accurate dialing when
transmitting from an inside line to an outside line.
“P” appears in the screen.
– [–]: Touch this key to insert the dash as separator
symbol while dialing. This has no effect on the
dialing. “–” appears in the screen.
– [Abbr.]: Use the keypad to enter the abbreviated
dialing number (up to 2,000 from 0001 to 2000)
and specify a destination registered as an
abbreviated number.
To specify redialing
Dialing the same recipient again is called “redialing”.
1
Touch [Direct Input] on the Program Screen.
The Direct Input Screen will be displayed.