To select finishing settings, To select finishing settings -28 – Konica Minolta bizhub 500 User Manual
Page 64
Advertising
2
Using copy functions
2-28
bizhub 500/420
U
s
in
g cop
y
fu
nct
ion
s
Ch
ap
te
r 2
To select Finishing settings
1
Touch [Finishing] on the Basic Screen.
The Finishing Screen will be displayed.
2
Select the desired settings.
– To cancel changes to the settings, touch
[Cancel].
– To cancel a setting, touch the key again to
deselect it.
– If the “Corner Staple”, “2 Staple”, “2-hole Punch”
or “3-hole Punch” setting was selected, touch
[Position Setting], and then touch the key for the
desired position.
Advertising
This manual is related to the following products: