Konica Minolta BIZHUB C652DS - Manual (Page 120)

bizhub C652/C652DS/C552/C552DS/C452 2-102
2.32 Printing (Netware) 2
In Print Server mode using the NetWare 4.x Bindery Emulation
0 When you use the Bindery Emulation, make sure that the Bindery Emulation has been enabled on the
NetWare server.
0 When you select the Print Server mode, the IPX protocol must already be loaded on the NetWare server.
1
From the client, log in the NetWare file system as Bindery with the administrator authority.
2
Start Pconsole.
3
Select "Quick Setup" from "Available Options" list box, and press the [Enter] key.
4
Fill in "Print Server Name", "Printer Name", and "Print Queue Name". Set the "Type" of the printer to
"Other/Unknown", and save them.
5
Terminate Pconsole by pressing the [Esc] key.
Then, configure the following settings in "NetWare Setting".
Item Description Prior check
IPX Setting Select "ON".
Ethernet Frame
Type Select a frame type to be used. Frame type
NetWare Print
Mode Select "Nprinter/Rprinter".
Print Server Name Enter a print server name to be operated as the Nprint-
er/Rprinter (up to 63 characters, excluding / \ :; , * [ ] < > |
+ = ? .). The print server
name specified in
Step 4
Printer Number Enter the Nprinter/Rprinter number.
Item Description Prior check
IPX Setting Select "ON".
Ethernet Frame
Type Select a frame type to be used. Frame type
NetWare Print
Mode Select "PServer".
Print Server Name Enter a print server name to be operated as Pserver (up to
63 characters, excluding / \ :; , * [ ] < > | + = ? .). The print server
name specified in
Step 4
Print Server Pass-
word Enter a print server password if necessary (up to 63 char-
acters).
Polling Interval Set a job inquiry interval.
Bindery/NDS Set-
ting Select "Bindery/NDS Setting".
File Server Name Enter the priority file server name to be used in the Bindery
emulation mode (up to 47 characters, excluding /\ :; , * [ ]
< > | + = ? .).